Grundy Center, Iowa Multi-Party Farm Equipment Auction

Farm Auction in 1308 4th Street Grundy Center, IA 50638, Grundy Center, Iowa, United States

10 Thursday
10th December, 2020 10:00 AM

Grundy Center, Iowa Multi-Party Farm Equipment Auction

Farm Auction in 1308 4th Street Grundy Center, IA 50638, Grundy Center Iowa, United States

Thursday at - 10th December , 2020

Close

Description

Timed Online Auction of 4WD, MFWD & 2WD Tractors, Combines, Corn & Flex Heads, Head Trailers, Planters, Seed Tenders, Finishers & Cultivators, Tillage, Applicators, Hopper Bottom, Grain Cart, Augers, Manure Pump & Lift, Grader, Tile Plow & Cart, Loader & Equipment and More! For information contact Steffes Group at 641.423.1947; Nate Larson, 319.931.3944 or Jerry Roth, 319.750.3269

Timed Online - Grundy Center, Iowa

Multi-Party Farm Equipment Auction

 

Equipment located at Grundy County Fairgrounds, 1308 4th Street, Grundy Center, IA 50638


AUCTIONEER’S NOTE:Take a look at this equipment offering from local farmers.  Questions regarding the equipment? Feel free to call the contact person on the equipment listed. Sales tax applies, exemption forms available.  All items to be removed within 7 days. 

 

Bidding Opens: Thursday, December 10

Bidding Closes: Thursday, December 17, 2020 at 10AM

 

4WD TRACTORS

1990 John Deere 8760, 6,254 hrs., 4WD, 16 speed quad range, CAH, 4 hyd., BB, 20.8R42 duals, S/N RW8760S002785 - Bill Havelka - 641.750.4862

1989 John Deere 8760, 7,070 hrs., 4WD, 16 speed quad range, CAH, 4 hyd., BB, 20.8R42 duals, S/N RW8760H00761 (2nd gear range is out of transmission) - Richard Rolston - 641-328-9578

 

MFWD TRACTORS

2005 New Holland TG255, 3,417 hrs., MFWD, S/N JAW134700 – Greg Shine – 641.750.1804

2005 McCormick CX85, 2,020 hrs., MFWD, CAH, 4 hyd., 3 pt. w/quick hitch, 540/1000 PTO, mounted L140 front loader, bucket, bale spear, S/N CZ85AS4JJE2056312 - John Roupp - 641.751.7088

 

2WD TRACTOR

1990 John Deere 4955, shows 1,139 hrs., 2WD, 16 speed powershift, CAH, 3 hyd., 3 pt., Lg. 1000 PTO, (8) front weights, duals, S/N RW4955P002482 - Mike Broer - 641.373.3679

 

COMBINES

2008 Case-IH 2588, 1,960 sep./ 2,612 eng. hrs., 2WD, standard cab, Field Tracker, AFS, front & rear beacons, ext. unloading auger, large grain hopper ext., S/N HAJ304218 - Charles Walters - 641.858.3166           

1988 Case-IH 1680, 2WD, standard rotor, standard cab, land level, rock trap, grain tank hopper ext.,hyd., drive chaff spreader, S/N JJC0044362 - Eli Mathern - 641.485.1292

 

CORN HEADS

2009 John Deere 608C, corn head, 8x30", S/N 730722 - Steven Scheid - 641.377.2648

2003 Caterpillar 1230, corn head, 12x30" w/alum. crop sweep, Tru Sense, S/N 2ZZ01018 - Andy Prosser - 641.751.6006

Case-IH 1083, corn head, 8x30", steel dividers, ear savers, S/N JJC014289 - Eli Mathern - 641.485.1292

 

FLEX HEADS

2007 John Deere 635F, flex head, 35', hyd. fore/aft, stubble lights, S/N 716806 - Steven Scheid - 641.377.2648

2000 John Deere 925F, flex head, 25', spare one piece sickle, S/N H00925F686417 - Jeff Goecke - 641.495.1139

Case-IH 1020, grain platform, 30', hyd. fore/aft, standard hookups, S/N CBJ043669 - Charles Walters - 641.858.3166 

 

HEAD TRAILERS

Unverferth HT 25, wagon type, 25'

Shop-Built head trailer, wagon type, 25' - Eli Mathern - 641.485.1292

 

PLANTERS

2010 Kinze 3660,bulk fill planter, 16x30", drawbar, pivot, vacuum, spiked row cleaners, row markers, interplant, Tru Count air clutches, corn & bean meters, Ag Leader monitor, PTO pump, S/N 660118 - Dallas Wessels - 319.404.2304

1998 White 6200, 12x30”/13x15” inter plant, Dawn row cleaners, copperhead spike closing wheels, SM4000 monitor – Greg Shine – 641.750.1804

John Deere 7000, planter, 2-row, 3 pt., ground-driven, spikebar seed corn unit planter - Heath Meyers - 319.415.8002

John Deere 7000,planter, 16-row frame, drawbar, front fold, ground-driven, S/N A07000D010129 - Heath Meyers - 319.415.8002

 

DRILL

John Deere 8300, drill, 13', drawbar, ground-driven, seed attachment - Eli Mathern - 641.485.1292

 

SEED TENDERS

Killbros, gravity flow, 300 bu., w/Daycon hyd. unload auger - Charles Haywood - 641.750.4049

Seed Tender 110 - Bill Havelka - 641.750.4862

 

FINISHERS & CULTIVATORS

2008 Krause TL 6200, field finisher, 45', pull-type, tri-fold, rolling basket harrow, S/N 1603 - Duane Woebbeking - 641.751.0760

2012 DMI Tigermate 200, field cultivator, 46-1/2', pull-type, double fold, walking tandems, S/N JFH0044312 - Dan Vanarendonk - 641.660.3467

Wil-Rich Quad-5,field cultivator, 39', pull-type, poly applicator tank - Charles Walters - 641.858.3166           

International 45, field cultivator, 25', pull-type - Charles Walters - 641.858.3166  

DMI Tigermate, field cultivator, 32', pull-type, wing fold, spike tooth harrow, S/N 222042 - Todd Kjormoe - 641.373.2324

John Deere 875, row crop cultivator, 30', 3 pt., rolling shields - Richard Rolston - 641-328-9578

 

TILLAGE

DMI 527 Ecolo-Tiger, disc chisel, 5-shank, pull-type, S/N 020010 - Dale Grimmius - 319.269.2366 

Brent CPC, ripper, 17-1/2', 7-shank, pull-type, S/N B1669134 - Heath Meyers - 319.415.8002

Brent CPC,ripper, 12-1/2', 5-shank, pull-type, S/N 2005502 - Heath Meyers - 319.415.8002

International 496, disc, 25', pull-type, 9" spacing, 22" disc blades, S/N 0162490 - Charles Haywood - 641.750.4049

International 490, disc, 32', pull-type, 7" spacing, S/N 0470000U028287 - Heath Meyers - 319.415.8002

Krause 19, disc, 32', pull-type, S/N 2827 - Todd Kjormoe - 641.373.2324

John Deere 450, plow, 5-bottom, 2 pt., rolling coulter blades, 7.60-15 tires, S/N 11321 - Joel Engle - 641-750-9595

Matthews MC 180SB, stalk chopper, 15', S/N 49961 - Todd Kjormoe - 641.373.2324

International 50, flail chopper 13', 540 PTO, hyd. lift - Charles Haywood - 641.750.4049

Bradco, harrow, 34', pull-type, S/N 0454 - Heath Meyers - 319.415.8002

 

APPLICATORS

2009 Wako BCW 190, NH3 applicator bar, 60', pull-type, 18" disc blades, 12.5L-15 tires - Dallas Wessels - 319.404.2304

DMI 4250, NH3 applicator bar, 16-shank, pull-type - Dale Grimmius - 319.269.2366 

 

HOPPER BOTTOM

2008 Wilson Commander, grain hopper, 40'x96', aluminum, roll tarp, air ride, VIN 248649 - Heath Meyers - 319.415.8002

 

GRAIN CART

Brent 672,grain cart, roll tarp, scales S/N 672346 - Charles Walters - 641.858.3166

 

AUGERS

Grain King GSI, swing hopper, 10"x72', S/N S-1104 - Joel Engle - 641-750-9595

Westfield MK 100,hyd. swing hopper, 10"x71', 540 PTO, S/N 229056 - Charles Walters - 641.858.3166

Wheatheart 6158,swing hopper, 10"x 71' - Dale Grimmius - 319.269.2366

Westfield WR 100, truck auger, 10"x 31', 540 PTO, S/N D06240 - Charles Haywood - 641.750.4049 - Charles Haywood - 641.750.4049

3 Pt. Manlift - Richard Rolston - 641-328-9578

 

MANURE PUMP & LIFT

Balzer V-6, manure pump 037-1203U63815075, 1000 rpm - Charles Haywood - 641.750.4049

Manure Load Lift, 8" x 32' - Charles Haywood - 641.750.4049

 

GRADER

Pull-Type Road Grader, 14' blade, 6-way blade, hyd. angle, hyd. tilt, hyd. lift, weight box, box blade ends, single axle - Heath Meyers - 319.415.8002

 

TILE PLOW & CART

Tile Plow, pull-type - Dale Grimmius - 319.269.2366 

Tile Stringer Cart single axle, hyd. lift - Dale Grimmius - 319.269.2366 

4" & 5” Tile - Dale Grimmius - 319.269.2366 

(1) Roll of 4" tile - Bill Havelka - 641.750.4862

(1) Roll of 6" tile - Bill Havelka - 641.750.4862

 

LOADER & EQUIPMENT

Westendorf TA 28, material bucket, 96", w/bale spear & pallet fork - Charles Haywood - 641.750.4049

Brush cutter, 7', 540 PTO, 3 pt. - Charles Haywood - 641.750.4049

Poly Tank, 400 gal., adj. saddle & stand - Charles Haywood - 641.750.4049

(10) Dawn row cleaners - Greg Shine – 641.750.1804

 

For information contact Steffes Group at 641.423.1947;
Nate Larson, 319.931.3944 or Jerry Roth, 319.750.3269

Close

Disclaimer


TERMS & CONDITIONS All items sold AS IS WHERE IS. Payment (Cash or Check) must be made sale day before removal of items. Announcements made sale day take precedence over all previous advertising. Titles (if any) will be mailed to buyers within two weeks of auction date. A document fee of $35 applies to all titled vehicles.


International buyers please check your importing regulations prior to bidding. Real Estate terms and conditions will vary per auction.    


WEBSITE ADDRESSES (ONLINE & ONLINE ONLY) www.steffesauctioneers.com   www.IQBID.com    


CORPORATE OFFICE


Steffes Auctioneers Inc.


2000 Main Avenue East


West Fargo ND 58078-2210


Phone: (701) 237-9173(701) 237-9173


Toll Free: (800) 726-8609(800) 726-8609


Fax: (701) 237-0976


E-Mail: [email protected]  [email protected]


AUCTIONEER LICENSES

Scott Steffes ND81 & MN14-51


Bob Steffes ND82 & MN14-09


Brad Olstad ND319 & MN14-70


Clark Sather ND463 & MN54-05      


REAL ESTATE MARKETING


Scott Steffes, Broker


Rodney Steffes, Licensed Sales Associate


Geri Paul, Licensed Sales Associate


Ashley Huhn, Licensed Sales Associate    


LITCHFIELD OFFICE


Steffes Auctioneers Inc


24400 MN Highway 22 South


Litchfield, MN 55355


Phone: (320) 693-9371(320) 693-9371  


Fax: (320) 693-9373


Email: [email protected]


[email protected]


[email protected]


[email protected]




AUCTIONEER LICENSES


Eric Gabrielson, MN47-006, ND890


Ashley Huhn, MN47-002, ND843


Randy Kath, MN47-001, ND894

Call

Send SMS

Add to Skype

You'll need Skype CreditFree via Skype

Map

Close

Location has been calculated by address and may not be 100% accurate.

Auction Items For Sale

Timed Online Auction of 4WD, MFWD & 2WD Tractors, Combines, Corn & Flex Heads, Head Trailers, Planters, Seed Tenders, Finishers & Cultivators, Tillage, Applicators, Hopper Bottom, Grain Cart, Augers, Manure Pump & Lift, Grader, Tile Plow & Cart, Loader & Equipment and More! For information contact Steffes Group at 641.423.1947; Nate Larson, 319.931.3944 or Jerry Roth, 319.750.3269

Timed Online - Grundy Center, Iowa

Multi-Party Farm Equipment Auction

 

Equipment located at Grundy County Fairgrounds, 1308 4th Street, Grundy Center, IA 50638


AUCTIONEER’S NOTE:Take a look at this equipment offering from local farmers.  Questions regarding the equipment? Feel free to call the contact person on the equipment listed. Sales tax applies, exemption forms available.  All items to be removed within 7 days. 

 

Bidding Opens: Thursday, December 10

Bidding Closes: Thursday, December 17, 2020 at 10AM

 

4WD TRACTORS

1990 John Deere 8760, 6,254 hrs., 4WD, 16 speed quad range, CAH, 4 hyd., BB, 20.8R42 duals, S/N RW8760S002785 - Bill Havelka - 641.750.4862

1989 John Deere 8760, 7,070 hrs., 4WD, 16 speed quad range, CAH, 4 hyd., BB, 20.8R42 duals, S/N RW8760H00761 (2nd gear range is out of transmission) - Richard Rolston - 641-328-9578

 

MFWD TRACTORS

2005 New Holland TG255, 3,417 hrs., MFWD, S/N JAW134700 – Greg Shine – 641.750.1804

2005 McCormick CX85, 2,020 hrs., MFWD, CAH, 4 hyd., 3 pt. w/quick hitch, 540/1000 PTO, mounted L140 front loader, bucket, bale spear, S/N CZ85AS4JJE2056312 - John Roupp - 641.751.7088

 

2WD TRACTOR

1990 John Deere 4955, shows 1,139 hrs., 2WD, 16 speed powershift, CAH, 3 hyd., 3 pt., Lg. 1000 PTO, (8) front weights, duals, S/N RW4955P002482 - Mike Broer - 641.373.3679

 

COMBINES

2008 Case-IH 2588, 1,960 sep./ 2,612 eng. hrs., 2WD, standard cab, Field Tracker, AFS, front & rear beacons, ext. unloading auger, large grain hopper ext., S/N HAJ304218 - Charles Walters - 641.858.3166           

1988 Case-IH 1680, 2WD, standard rotor, standard cab, land level, rock trap, grain tank hopper ext.,hyd., drive chaff spreader, S/N JJC0044362 - Eli Mathern - 641.485.1292

 

CORN HEADS

2009 John Deere 608C, corn head, 8x30", S/N 730722 - Steven Scheid - 641.377.2648

2003 Caterpillar 1230, corn head, 12x30" w/alum. crop sweep, Tru Sense, S/N 2ZZ01018 - Andy Prosser - 641.751.6006

Case-IH 1083, corn head, 8x30", steel dividers, ear savers, S/N JJC014289 - Eli Mathern - 641.485.1292

 

FLEX HEADS

2007 John Deere 635F, flex head, 35', hyd. fore/aft, stubble lights, S/N 716806 - Steven Scheid - 641.377.2648

2000 John Deere 925F, flex head, 25', spare one piece sickle, S/N H00925F686417 - Jeff Goecke - 641.495.1139

Case-IH 1020, grain platform, 30', hyd. fore/aft, standard hookups, S/N CBJ043669 - Charles Walters - 641.858.3166 

 

HEAD TRAILERS

Unverferth HT 25, wagon type, 25'

Shop-Built head trailer, wagon type, 25' - Eli Mathern - 641.485.1292

 

PLANTERS

2010 Kinze 3660,bulk fill planter, 16x30", drawbar, pivot, vacuum, spiked row cleaners, row markers, interplant, Tru Count air clutches, corn & bean meters, Ag Leader monitor, PTO pump, S/N 660118 - Dallas Wessels - 319.404.2304

1998 White 6200, 12x30”/13x15” inter plant, Dawn row cleaners, copperhead spike closing wheels, SM4000 monitor – Greg Shine – 641.750.1804

John Deere 7000, planter, 2-row, 3 pt., ground-driven, spikebar seed corn unit planter - Heath Meyers - 319.415.8002

John Deere 7000,planter, 16-row frame, drawbar, front fold, ground-driven, S/N A07000D010129 - Heath Meyers - 319.415.8002

 

DRILL

John Deere 8300, drill, 13', drawbar, ground-driven, seed attachment - Eli Mathern - 641.485.1292

 

SEED TENDERS

Killbros, gravity flow, 300 bu., w/Daycon hyd. unload auger - Charles Haywood - 641.750.4049

Seed Tender 110 - Bill Havelka - 641.750.4862

 

FINISHERS & CULTIVATORS

2008 Krause TL 6200, field finisher, 45', pull-type, tri-fold, rolling basket harrow, S/N 1603 - Duane Woebbeking - 641.751.0760

2012 DMI Tigermate 200, field cultivator, 46-1/2', pull-type, double fold, walking tandems, S/N JFH0044312 - Dan Vanarendonk - 641.660.3467

Wil-Rich Quad-5,field cultivator, 39', pull-type, poly applicator tank - Charles Walters - 641.858.3166           

International 45, field cultivator, 25', pull-type - Charles Walters - 641.858.3166  

DMI Tigermate, field cultivator, 32', pull-type, wing fold, spike tooth harrow, S/N 222042 - Todd Kjormoe - 641.373.2324

John Deere 875, row crop cultivator, 30', 3 pt., rolling shields - Richard Rolston - 641-328-9578

 

TILLAGE

DMI 527 Ecolo-Tiger, disc chisel, 5-shank, pull-type, S/N 020010 - Dale Grimmius - 319.269.2366 

Brent CPC, ripper, 17-1/2', 7-shank, pull-type, S/N B1669134 - Heath Meyers - 319.415.8002

Brent CPC,ripper, 12-1/2', 5-shank, pull-type, S/N 2005502 - Heath Meyers - 319.415.8002

International 496, disc, 25', pull-type, 9" spacing, 22" disc blades, S/N 0162490 - Charles Haywood - 641.750.4049

International 490, disc, 32', pull-type, 7" spacing, S/N 0470000U028287 - Heath Meyers - 319.415.8002

Krause 19, disc, 32', pull-type, S/N 2827 - Todd Kjormoe - 641.373.2324

John Deere 450, plow, 5-bottom, 2 pt., rolling coulter blades, 7.60-15 tires, S/N 11321 - Joel Engle - 641-750-9595

Matthews MC 180SB, stalk chopper, 15', S/N 49961 - Todd Kjormoe - 641.373.2324

International 50, flail chopper 13', 540 PTO, hyd. lift - Charles Haywood - 641.750.4049

Bradco, harrow, 34', pull-type, S/N 0454 - Heath Meyers - 319.415.8002

 

APPLICATORS

2009 Wako BCW 190, NH3 applicator bar, 60', pull-type, 18" disc blades, 12.5L-15 tires - Dallas Wessels - 319.404.2304

DMI 4250, NH3 applicator bar, 16-shank, pull-type - Dale Grimmius - 319.269.2366 

 

HOPPER BOTTOM

2008 Wilson Commander, grain hopper, 40'x96', aluminum, roll tarp, air ride, VIN 248649 - Heath Meyers - 319.415.8002

 

GRAIN CART

Brent 672,grain cart, roll tarp, scales S/N 672346 - Charles Walters - 641.858.3166

 

AUGERS

Grain King GSI, swing hopper, 10"x72', S/N S-1104 - Joel Engle - 641-750-9595

Westfield MK 100,hyd. swing hopper, 10"x71', 540 PTO, S/N 229056 - Charles Walters - 641.858.3166

Wheatheart 6158,swing hopper, 10"x 71' - Dale Grimmius - 319.269.2366

Westfield WR 100, truck auger, 10"x 31', 540 PTO, S/N D06240 - Charles Haywood - 641.750.4049 - Charles Haywood - 641.750.4049

3 Pt. Manlift - Richard Rolston - 641-328-9578

 

MANURE PUMP & LIFT

Balzer V-6, manure pump 037-1203U63815075, 1000 rpm - Charles Haywood - 641.750.4049

Manure Load Lift, 8" x 32' - Charles Haywood - 641.750.4049

 

GRADER

Pull-Type Road Grader, 14' blade, 6-way blade, hyd. angle, hyd. tilt, hyd. lift, weight box, box blade ends, single axle - Heath Meyers - 319.415.8002

 

TILE PLOW & CART

Tile Plow, pull-type - Dale Grimmius - 319.269.2366 

Tile Stringer Cart single axle, hyd. lift - Dale Grimmius - 319.269.2366 

4" & 5” Tile - Dale Grimmius - 319.269.2366 

(1) Roll of 4" tile - Bill Havelka - 641.750.4862

(1) Roll of 6" tile - Bill Havelka - 641.750.4862

 

LOADER & EQUIPMENT

Westendorf TA 28, material bucket, 96", w/bale spear & pallet fork - Charles Haywood - 641.750.4049

Brush cutter, 7', 540 PTO, 3 pt. - Charles Haywood - 641.750.4049

Poly Tank, 400 gal., adj. saddle & stand - Charles Haywood - 641.750.4049

(10) Dawn row cleaners - Greg Shine – 641.750.1804

 

For information contact Steffes Group at 641.423.1947;
Nate Larson, 319.931.3944 or Jerry Roth, 319.750.3269

contact_phone