2001 Luverne Advantage II Spartan Pumper

For Sale by Auction in
Pulteney, New York, US

  Fleet # – Year – 2001Make – LuverneModel – Advantage IIBody Style – Spartan Pumper VIN/SN – 4S7HT23901C039329Odometer Numbers – The dash was updated at 21398 miles. Current milage is a plus 3230Hours – Engine Make/Model – Cummins 330HpCyl – ISC 330Fuel Type – Turbo DieselTransmission Name – AutomaticTransmission Type – AllisonSingle Axle/Dual Axle – Single Axle Dual Wheel Tire Size/Type – 12R22.5 Tire Condition – GoodPlow Size –  Dump Box Size – Drivetrain – 4×2GVWR – 42,000Lbs   Does the unit operate? – YesDoes the vehicle start? – YesAre…

Bidding closes at
Location
Pulteney, New York, United States (US)

Item description:

 

Fleet # – 
Year – 2001
Make – Luverne
Model – Advantage II
Body Style – Spartan Pumper
VIN/SN – 4S7HT23901C039329
Odometer Numbers – The dash was updated at 21398 miles. Current milage is a plus 3230
Hours – 
Engine Make/Model – Cummins 330Hp
Cyl – ISC 330
Fuel Type – Turbo Diesel
Transmission Name – Automatic
Transmission Type – Allison
Single Axle/Dual Axle – Single Axle Dual Wheel
Tire Size/Type – 12R22.5
Tire Condition – Good
Plow Size –  
Dump Box Size – 
Drivetrain – 4×2
GVWR – 42,000Lbs  

Does the unit operate? – Yes
Does the vehicle start? – Yes
Are keys available? – Yes
Ownership Information – Title
Mechanical Condition – Good
Mechanical Notes – It is well maintained and operational
Body Condition – Good
Body Notes – The chassis length is 31' 11". The height is 118". The cab is a 4-door 6-man type. The height is 9' 9"and the overall length is 32'and width is 8' 6". It has small minor rust spots
Interior Condition – Good
Misc Info – it has a Waterous 1,250 GPM mid-ship centrifugal pump paired with a 750-gallon polypropylene water tank. It is well equipped. The interior is in good for its age. Includes a North star 6500 DPG diesel generator, 120V/240V type with Yanmar engine 180Hrs. It also comes with books and manuals.

 

The following general information is web-sourced and may contain variances from the subject unit:

2001 Luverne Spartan Advantage II is a classic custom municipal fire apparatus pairing a Spartan custom chassis with a heavy-duty Luverne body. Its compact dimensions and mid-ship fire pump make it an agile workhorse well-suited for both urban and rural firefighting operations. 

 

Chassis & Dimensions

The truck is built on a custom Spartan Advantage chassis engineered specifically for fire and rescue service. 

  • Compact Footprint. At 31' 11" long and 118" (9' 10") tall, it offers a relatively low overall height and tight turning radius, allowing it to clear standard 10-foot firehouse doors and navigate narrow streets or wooded driveways easily.
  • Crew Cab. The 4-door, 6-person enclosed cab provides safe, weather-protected seating for a full engine company, typically configured with five SCBA (Self-Contained Breathing Apparatus) seats and one standard driver seat. 
  • Weight & Tires. Rated at a 42,000-lb GVWR on a 4×2 drivetrain, it rides on commercial heavy-duty 12R22.5 tires designed to support the constant static load of a full water tank and heavy rescue equipment. 

Engine: Cummins ISC 330 HP

Powering the apparatus is a Cummins ISC 8.3-liter turbocharged inline-six diesel engine, a staple of early-2000s medium- and heavy-duty fire trucks. 

  • Power & Torque. It produces 330 horsepower and approximately 950 to 1,000 lb-ft of peak torque at 1,400 RPM, giving the pumper strong off-the-line acceleration and solid hill-climbing power under full load.
  • Pre-Emissions Design. Built in 2001, this engine predates modern EGR (Exhaust Gas Recirculation), DPF (Diesel Particulate Filter), and DEF (Diesel Exhaust Fluid) systems. This makes it mechanically simpler and eliminates the regeneration cycles that affect newer diesels. 
  • Fuel System. A 2001 ISC uses the electronic Cummins Accumulator Pump System (CAPS) for high-pressure fuel injection, known for crisp throttle response when running the fire pump. 

Transmission & "Pump in Drive" Operation

The engine is mated to an Allison World Transmission (typically an MD3060 5- or 6-speed automatic) controlled via a push-button shift selector with R, N, D, up/down arrows, and a Mode button. 

  • Electronic Shift Selector. The Up/Down arrows allow the driver to manually lock out higher gears on steep grades or slick roads, while the Mode button switches between performance/emergency response shift points and economy shifting.
  • "Pump in Drive". Because this truck uses a split-shaft mid-ship fire pump, the transfer case disconnects power from the rear axle and routes it directly to the pump when engaged. Placing the Allison selector in D (Drive) while in pump mode locks the transmission into direct drive (1:1 ratio, typically 4th gear), allowing the engine to spin the pump efficiently without shifting gears. (Note: Always confirm the parking brake is set and wheels are chocked before shifting into Drive for stationary pumping.)

Fire Pump & Water Tank

At the heart of its firefighting capability is a Waterous 1,250 GPM mid-ship centrifugal pump paired with a 750-gallon polypropylene water tank. 

  • 1,250 GPM Rating. Typically, a Waterous CS (single-stage) or CM (two-stage) model, this pump is rated to deliver 1,250 gallons per minute at 150 PSI from draft, easily supplying multiple 1¾" attack lines or a 2½" master stream.
  • 1:2.27 Gear Ratio. The pump transmission uses a 2.27 overdrive step-up ratio. This multiplies the engine's RPM by 2.27, allowing the pump impeller to reach high operating speeds (around 3,400–4,100 RPM) while keeping the Cummins engine running comfortably in its sweet spot around 1,500–1,800 RPM.
  • 750-Gallon Poly Tank. Constructed of corrosion-proof polypropylene, the 750-gallon booster tank provides roughly 6,250 lbs of onboard water—enough for an aggressive initial attack before establishing a hydrant or tender supply line. 

Notable Body & Operational Features

  • Luverne Body Construction. Built by Luverne Fire Apparatus (prior to its integration into Spartan Emergency Response), these bodies are known for heavy-gauge aluminum or stainless-steel compartmentation with high-side/low-side storage layouts and roll-up or hinged doors.
  • Standard Pumper Plumbing. Trucks of this specification typically feature two 1¾" speedlays or crosslays above the pump house, dual 6" main steamer intakes, 2½" gated intakes/discharges on both sides, and a pre-piped deck gun (deluge) mount on top.

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

EMERGENCY VEHICLE DISCLAIMER
This vehicle is being sold as a retired emergency vehicle and may be equipped with red/white lights, strobes and/or sirens. If a municipality or legal law enforcement agency is NOT the highest bidder for this lot, it will be the responsibility of the bidder to decommission ALL EMERGENCY INSTRUMENTS prior to the vehicle leaving the facility. This means you will have to cut power to; lights, sirens and/or any radio equipment (shall it be equipped). You must also de-identify this vehicle as being an emergency vehicle. Failure to do so may result in legal ramifications and potential accusations of impersonation. Please keep in mind that former emergency vehicles may have the following (but not limited to): holes in roof or trunk from removed antennas, lights and sirens, missing center console, specialty rear seating, interior cages, and any other emergency vehicle equipment. It is the responsibility of the bidder to inspect each asset you are bidding on and make satisfactory determinations about the condition thereof.