Fleet # –
Year – 1993
Make – Champion
Model – 710A
Body Style – Motor Grader
Serial Number – 157-1633-23393
Odometer Numbers –
Hours – 2256
Engine Make/Model – Cummins 6BT5.9 5.9L, 148 gross hp (135–140 net hp) at 2,200–2,300 RPM and 440 lb-ft of peak torque at 1,600 RPM.
Cyl – 6
Fuel Type – Diesel
Transmission Name –
Transmission Type – Manual
Single Axle/Dual Axle – Tandem Axle Single Wheel
Tire Size/Type – 14.00-24TC
Tire Condition – Poor
Plow Size –
Dump Box Size –
Drivetrain – 4WD
GVWR – Base weight roughly 30,630 to 31,050 lbs
Does the unit operate? – Yes
Does the vehicle start? – Yes
Are keys available? – Yes
Ownership Information – Bill of Sale Only (No Title)
Mechanical Condition – Fair
Mechanical Notes – However, it currently has a steering issue. It has a problem when driving straight the rear steering wants to wobble one direction or the other. Specs: Champion/Gearco 8400 fully sequential, direct drive powershift transmission, 8 forward gears (reaching a top speed of 24.5 mph) and 4 reverse gears (up to 17.8 mph).
Body Condition – Fair
Body Notes – It is solid with average rust and wear, glass is intact, has some lower door spot rot, view images.
Interior Condition – Fair
Misc Info – The 2-way radio will be removed, 12' Moldboard, 66.3" diameter circle with full 360-degree rotation. Bidders are encouraged to inspect.
The following general information is web-sourced and may contain variances from the subject unit:
The 1993 Champion 710A is a heavy-duty, articulated tandem-drive motor grader built by Champion Road Machinery (later acquired by Volvo Construction Equipment). Weighing roughly 30,630 to 31,050 lbs, it was engineered as a versatile mid-sized machine for municipal road maintenance, site prep, ditching, and snow removal.
Serial Number Breakdown (157-1633-23393)
- Model Code (157). Identifies the specific chassis and series configuration within Champion’s 700 Series production lineup (specifically a Series III/IV era 710A built prior to the Volvo transition).
- Build & Spec Identifier (1633). Refers to the factory build sheet and option group installed on the assembly line, such as cab configuration, hydraulic valve banks, and tire/blade packages.
- Sequential Unit Number (23393). The unique consecutive production number assigned to this individual frame, which is essential when ordering exact-fit replacement parts from aftermarket suppliers or Volvo CE dealers.
Cummins Engine
- Model & Displacement. Powered by the Cummins 6BT5.9 (also listed as 6B5.9), a 5.9-liter (360 cu in) 4-cycle, turbocharged inline 6-cylinder diesel engine.]
- Horsepower & Torque. Delivers 148 gross hp (135–140 net hp) at 2,200–2,300 RPM and 440 lb-ft of peak torque at 1,600 RPM.
- Reputation & Serviceability. The mechanical Cummins 5.9L is widely prized in older heavy equipment for its simplicity, cold-weather starting reliability, fuel efficiency, and readily available parts.
Transmission & Drivetrain Clarification
- Powershift the factory Champion 710A uses a Champion/Gearco 8400 fully sequential, direct drive powershift transmission.
- Gears & Speeds. Features 8 forward gears (reaching a top speed of 24.5 mph) and 4 reverse gears (up to 17.8 mph), controlled by a single-lever "Smart Shifter" with an inching pedal for precise low-speed grading.
- Final Drive & Tandems. Uses a heavy-duty operator-controlled lock/unlock differential and rugged chain-driven rear tandem housings.
Moldboard, Tires & Key Features
- 12-Foot Moldboard. Comes standard with a 12' x 25" x 0.875" (0.9") sliding moldboard mounted on a 66.3-inch diameter circle with full 360-degree rotation and up to 16,495 lbs of blade down-pressure.
- 14.00-24TC Tires. While 13.00-24 tires were standard base equipment, the 14.00-24 size was a popular factory upgrade. The "TC" stands for Traction / Grader tread (G-2 style), giving the machine a wider footprint, extra ground clearance, and better bite in mud, gravel, and snow.
- Articulated Frame & Hydraulics. Offers 22 degrees of frame articulation for a tight 25.5-foot turning radius, paired with 18 degrees of front wheel lean. Its closed-center, load-sensing hydraulic system runs at 2,500 psi to allow smooth, simultaneous blade adjustments without engine bogging.
- Operator Cab & Braking. Equipped with a ROPS enclosed cab featuring a Moveable Blade Control System (allowing the operator to position the blade for steep bank sloping from inside the cab) and 4-wheel hydraulically boosted wet disc brakes with reserve power assist.
Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.
